• English
  • $ USD
  • £ GBP
  • EUR
  • $ CAD
  • A$ AUD
  • د.إ AED

No relevant currency found

/ /

NEWiPollo V1 mini Classic reveiws 2022

Aug 10,2022 | YESUN

IPOLLO V1 MINI Hash rate (MH/s): 280±10%
Mining ETC to pay back quickly, small investment
half year return
Consumption: 270±10%
Computing power consumption rate (WM/H): 0.8±10%
Encryption Algorithm/Token: Ethash
IPOLLO MINI miner, completely silent type, power consumption is only 270W, only 5 kWh of electricity a day, even if the household electricity is 1 yuan/kWh, there is no need to worry about the single electricity bill, and there is no need to worry about the problem of easily reaching the shutdown currency price, and it will fall again. The currency price can be resisted, and the profit of the machine can reach about 58%. The return cycle is faster than other models. It is quiet and suitable for mining at home and in the office. To meet the mining needs of most miners, you can also mine at home in limited production. Anyone who wants to buy or want to know about other mining machines can contact me.

V1 Mini  Server Setup Manual

There are 4 models in the V1 Mini Classic Series:

(1) iPollo V1 mini Classic;

(2) iPollo V1 mini Classic WiFi;

(3) iPollo V1 mini Classic Plus;

(4) iPollo V1 mini Classic Plus WiFi.

During use, the network settings are different, and the versions are divided into WiFi version and wired connection version.

1. Check before using V1 mini Classic WiFi

1. Sign-off check

(1) When signing for a new server, please check whether the package is damaged in appearance. If it is damaged, please take a picture and contact the after-sales service.

(2) After opening the package, please check whether the server case is deformed, whether the fan and connecting cable are damaged, and whether the connecting cable is damaged. If it is damaged, please take a picture and contact our after-sales service.

(3) Please check the server for abnormal sound. If there is any abnormal sound, please contact our after-sales service.
2. Remarks

(1) Recommended ambient temperature range: 10℃-25℃.

(2) The computing power is based on the 24-hour computing power of the mining pool.

(3) Pay attention to dust and foreign objects, so as not to corrode the computing board or affect the heat dissipation of the server.

(4) It is recommended to use Google Chrome or Firefox browser to browse the server background.

(5) It is strictly forbidden to plug and unplug the power cord and signal line while electrified. The AC side of the server power supply must be reliably grounded.

2. V1 mini Classic WiFi: product introduction

1. main components

(1) "1": WiFi signal receiver

(2) "2": Power cord

(3) "3": V1 Mini Classic WiFi

(4) "4": power adapter (the picture is for reference only, please refer to the actual product)

2. Interface introduction

Fault: Fault warning light. In most cases, when this light flashes, it means a

failure: has occurred

OK: Running light. In most cases, when this light is on, it means the machine is working properly

Reset: Server Factory Reset button

IP report: use the show IP software to feed back the IP of this server to the computer

TF card: SD card slot

Power supply: Power interface

ANT: WIFI Antenna

ETH: network interface

3. Remark

(1) When the server is running, please place it as shown in the figure below, that is, lay it flat to avoid damage to the server.

(2) Outlets should be installed near the server and should be easily accessible.

(3) The two 6PIN power ports must be connected at the same time to supply power.

(4) This product needs 100~240VAC power input to make the product work normally. When the server is powered off, the power switch must be turned off first.

(5) For your safety, do not remove any screws on the server.

(6) Do not press the metal button on the case.

3. V1 mini Classic WiFi: use and configuration

1. server connection

(1) Power connection

The V1 mini Classic WiFi dedicated power supply has two 6PIN DC outputs, and the power input is 100~240VAC. After confirming that the connection is good, the server can work normally.

(2) Internet connection

(2-1) Wired connection

The interface marked "ETH" on the interface panel of the server is the network cable interface. Pay attention to the direction when inserting the network cable. Please insert the crystal head into place. A slight "click" is usually heard when inserted into place.

(2-2) WiFi connection

The red box in the picture is the WiFi antenna, which can be connected to the WiFi signal. For details, please visit "http://ipollo.com/support".

2. login server

2.1 Find the server IP

Once the server is powered up and connected to the internet, it starts to boot. Once the server starts to light up normally, you can find the IP of the server. You can use the "Show IP" software to find the server

The IPs are as follows:

(1) Download software: display IP

(2) Double-click "Show IP" to open the software.

(3) Short press the "IP Report" button on the server for 1 second and release it.

(4) Feedback server IP information on the PC, as shown below:

Note: The server and PC must be in the same network segment, otherwise the IP information returned by the server cannot be received.

2.2 Enter the server background management system

(1) After finding the server IP, enter the obtained IP address in the browser (Google is recommended), press Enter to enter the server login interface, and enter the default administrator account password: root

(2) Press "Login" to enter the server background management system as follows:

3. Server settings

Click the "Miner Configuration" interface of "Configuration" to set the "Mining Pool" and "Network"

3.1 Fill in the mining pool information

Note: This manual uses "antpool" as an example.

ETC mining address: stratum+tcp://47.108.153.82:8008

(1) Select "Mining Pool Configuration" and fill in the mining pool information

(1-1) "Url" in "Pool 1" fill in the ETC AntPool mining link address: stratum+tcp://47.108.153.82:8008

(1-2) Fill in “ipollomini.001” for “Worker” in “Pool 1”; “ipollomini” is a custom “sub-account” in the corresponding mining pool account; numbers suffixed with “.001” are used for Numbers that differentiate servers ;).

Note: For customization such as numbers or letter combinations, separate them with English periods, only modify the corresponding characters, do not increase or decrease spaces and punctuation)

Note: In order to prevent "Pool 1" from being disconnected, causing the server to fail to work, it is recommended to set "Pool 2" and "Pool 3" at the same time to ensure the normal operation of the system. When "Pool 1" is offline, it will automatically switch to "Pool 2" ” or “Pool 3” operates normally.

3.2 Network Settings

In terms of network connection, V1 mini Classic series products are divided into two modes: "wired connection" and "WiFi connection". You can set up the server according to the appropriate model obtained from the following instructions:

3.2.1 Wired connection

(1) Select "Network Configuration" and fill in the network information:

(2) In the Protocol column, select one of "DHCP (dynamic)" or "Static" (optional).

(2-1) Select “DHCP (Dynamic)” status: the server obtains an IP address automatically

After setting, click "SAVE&APPLY", the system will save and automatically restart to take effect, and the server starts to run normally.

At this point, the server configuration is complete, congratulations on becoming a miner.

(2-2) Select "Static" state

(a) Enter the IP address, netmask, gateway and DNS-Server in the following four boxes, and then click "SAVE&APPLY"

(b) After the page buffering is completed, the server configuration is completed, congratulations on your becoming a miner.

Note: The protocol information filled in (static) "Network Configuration" in the figure is for reference only, please refer to the on-site network protocol information for details.

3.2.2 WiFi connection

(1) After the V1 mini Classic WiFi server is powered on, it will send out the WiFi signal "iPollo_XXXXX"; turn on the laptop and connect the wireless signal "ipollo_XXXXX"

(2) Browse the server's default IP address "192.168.2.1" on the website to enter the server login interface:

(3) Enter the password "root" to enter the server background control interface, click "wireless" to enter the wireless setting interface

(4) Modify the SSID and corresponding password (please make sure there is no error, otherwise the server cannot connect to the correct network)

(5) Click "Save and Apply" after editing

 

(6) After the application, the server needs to be powered off and restarted;

(7) Connect the laptop to the wireless signal "Nano (the network where the computer is located)"

(8) Open the showIP tool and click the "IP Report" button of the server to obtain the new IP address of the server, that is, the IP set by the WiFi.

(9) Using Google Chrome, log in to the IP displayed by the above tool showIP, you can enter the server management background, and fill in the mining pool information to complete the server setting.

3.3 Modify login password

To change the server login password, the operation method is as follows:

(1) The server is powered on and connected to the network;

(2) Enter the server IP account password and login information in turn through the browser (Google) to enter the server web page background;

(3) Click "System" and select "Change Password";

(4) Enter the modified new password in "New Password", enter the modified new password again in "Confirm", and then click "Save" below to take effect:

Note: The above takes the "ant pool" mining pool as an example. If you use another mining pool, please modify it to the address of the mining pool you want to use, and refer to the corresponding mining pool operation instructions.

 

important hint

(1) After the machine is running normally, please use the "24-hour computing power of the mining pool" as the stability judgment standard;

(2) It is recommended to use the original standard power supply to avoid damage to the machine or safety accidents;

(3) Try to use the original standard power supply, which can suppress the voltage shock at the moment of power-on;

(4) Please be careful not to splash water or other liquids on the machine, especially the non-casing part;

(5) Pay attention to ventilation and heat dissipation, do not block the vents, and do not put them on flammable materials and fabrics;

ALL ABOUT MINER PLS CONTACT ME :suppor@yesune.com

 

 

Comment

Name
Email
Comment
Back to YESUN.